Veröffentlichungen

Autor(en)TitelErschienen inJahr
Benecke, S., Ruckschloss, J., Nissen, N.F., Lang, K.-D.Energy harvesting on its way to a reliable and green micro energy sourceIn Proc. of Electronics Goes Green 2012 (EGG2012), ), vol., no., pp.1,8, 9-12 Sept. 20122012
Bilge, Pinar, Fazleena Badurdeen, I. S. Jawahir, and Günther SeligerIntegrated Sustainable Maintenance: A New Framework for Improved Manufacturing Efficiency and ProductivityTowards implementing sustainable manufacturing: Proceedings of the 10th Global Conference on Sustainable Manufacturing, ed. Günther Seliger and S. E. Kiliç, 288?93. Ankara, Turkey2012
Creutzig, Felix, Rainer Mühlhoff, and Julia RömerDecarbonizing Urban Transport in European Cities: Four Cases Show Possibly High Co-BenefitsEnvironmental Research Letters 7 (4): 0440422012
Edenhofer, O., & Steckel, J.Die Renaissance der Kohle und Chancen globaler KlimapolitikMining+ Geo-die Fachzeitschrift uber Bergbau Rohstoffe Felsbau und Geotechnik, (3), 3362012
Epstein, L., A. Levin, J. Mestre, A. Marchetti-Spaccamela, N. Megow, M.Skutella, and L. StougieUniversal sequencing on a single unreliable machineSIAM Journal of Computing 41: 565-586. doi: 10.1007/978-3-642-13036-6_182012
Erwin M. Schau, Marzia Traverso, Matthias FinkbeinerLife cycle approach to sustainability assessment: A case study of remanufactured alternatorsJournal of Remanufacturing, dx.doi.org/10.1186/2210-4690-2-52012
Gausemeier, P., SeligerPfade nachhaltiger Technologieentwicklung für unterschiedliche EntwicklungsniveausConference Proceedings of the 8th Symposium für Vorausschau und Technologieplanung, Berlin2012
Geyer, M., C. Reise, F. Manav, N. Schwenke, S. Böhm, G. SeligerOpen design for manufacturing ? Best practice and future challengesGeyer, M., C. Reise, F. Manav, N. Schwenke, S. Böhm, G. Seliger. 2012. ?Open design for manufacturing ? Best practice and future challenges.? Procedia CIRP, Proceedings of the 10th Global Conference on Sustainable Manufacturing (GCSM) ? Istanbul, Turkey. 666-671.2012
Heyer, Steffen, Peter Kramer, Ramona Gotze, Maximilian Ueberschaar, Gotthard Walter, Sabine Flamme, Susanne Rotter, and Günther SeligerBottom-up organized recycling networks as strategies for corporate sustainabilityElectronics Goes Green 2012+: Taking green to the next level: Joint International Conference and Exhibition Proceedings, ed. Klaus-Dieter Lang, 1?6. Stuttgart, Germany: IEEE2012
Huck, Steffen, Dorothea Kübler and Jörgen WeibullSocial Norms and Economic Incentives in FirmsJournal of Economic Behavior and Organization Vol. 83, Issue 2, 173?1852012
Inoue, M.; Lindow, K.; Stark R.; Tanaka, K.; Nahm, Y.-E.; Ishikawa, H.Decision Making support for sustainable product creationJournal of Advanced Engineering Informatics, 26 (), pp. 782?7922012
Jochem, R.; Weinaug, H.; Schäfer, M.Requirements, potentials and constraints of a semantic approach to model and access the sustainability within business processesProceedings of the 10th Global Conference on Sustainable Manufacturing. Istanbul, 435-440. ISBN: 978-605-63463-1-62012
Kohl, H.Benchmarking ? Lernen von den KlassenbestenWerkzeuge des Wandels: Die 30 wirksamsten Tools des Change Managements, edited by H. Roehl, B. Winkler, M. Eppler, and C. Fröhlich, 161-168. Stuttgart: Schäffer-Poeschel Verlag.2012
Lang, K.-D.Advanced Integration and Packacking Technologies for Smart SystemsMicromachine / MEMS, Tokyo, 20122012
Lang, K.-D.; Pötter, H. ; Aschenbrenner, R.; Becker, K.-F.; Boettcher, L.; Ehrmann, O.; Wilke, M.; Toepper, M.Innovation Driver of the Next Decade: Heterogeneous IntegrationChip Scale Review, pp. 21-25, ISSN 15261344 , San Jose, USA, Haley Publishing Inc., 20122012
Lindow K, Woll R, Stark R.:. In: Dornfeld DA, Linke BS, (Eds.)A Conceptual Framework for Sustainable Engineering DesignLeveraging Technology for a Sustainable World: Springer Berlin Heidelberg; 2012, p. 197-202. Proceedings of the 19th CIRP Conference on Life Cycle Engineering (LCE), 23-25 May 2012, Berkeley, USA. Springer.2012
Lindow, K.; Woll, R.; Inoue, M.; Ishikawa, H.; Stark, R.Approaches for sustainability assessment in the conceptual design phase[alt: Proceedings of the 22nd CIRP Design Conference (CIRP Design 2012), 28 - 30 March , Bangalore, India;] CIRP Design 2012, edited by A. Chakrabarti, 377-387. London: Springer London2012
Marzia Traverso, Francesco Asdrubali, Annalisa Francia, Matthias FinkbeinerTowards life cycle sustainability assessment: an implementation to photovoltaic modulesInternational Journal of Life Cycle Assessment, dx.doi.org/10.1007/s11367-012-0433-82012
Marzia Traverso, Matthias Finkbeiner, Andreas Jørgensen, Laura SchneiderLife Cycle Sustainability DashboardJournal of Industrial Ecology, 16 (5), pp. 680-688. doi:10.1111/j.1530-9290.2012.00497.x.2012
Mertins, K.; Kohl, H.; Orth, R.Intellectual Capital and Sustainability: A Concept for an Integrated ReportingProceedings of the 10th Global Conference on Sustainable Manufacturing, edited by G. Seliger and S. E. K?l?ç, (without page numbers). Istanbul: CIRP2012
Mertins, K.; Kohl, H.; Riebartsch, O.Benchmarking: The ideal Management Tool to exploit the "Triple Bottom Line of Sustainability" for long-term Success in Manufacturing IndustriesProceedings 10th Global Conference on Sustainable Manufacturing - Towards Implementing Sustainable Manufacturing, Istanbul 31st October - 02nd November 2012. pp. 309 - 314.2012
Orth, R.; Kohl, H.Intellectual Capital and Sustainability Management: Perspectives for an Integrated Reporting and BenchmarkingProceedings of the 7th Knowledge Asset Dynamics (IFKAD) and 5th Knowledge Cities World Summit (KCWS) Joint Conference, edited by G. Schiuma, J.C Spender, and T. Yigitcanlar, 159?78.2012
Orth, R.; Mertins, K.: . In: Surakka, J. (Hrsg.)Intellectual Capital and the Triple Bottom Line: Overview, concepts and requirements for an integrated sustainability management systemProceedings 4th European Conference on Intellectual Capital, edited by J. Surakka, 516?26. Reading: ACPI Ltd.2012
Orth, R.; Mertins, K.; Kohl, H.Integrated Reporting and Integrated Thinking in small and medium-sized enterprises: A Resource oriented Perspective8th Interdisciplinary Workshop on Intangibles, Intellectual Capital and Extra-Financial Information. 27-28 September, 2012 Grenoble Ecole de Management, France.2012
Pförtner A., Lindow K., Hayka,H., Stark, R.Concept for decision-making support in sustainable product design based on semantic ontology: Towards Implementing Sustainable Manufacturing10th Global Conference on Sustainable Manufacturing - Towards implementing sustainable manufacturing: Conference Proceedings, edited by Günther Seliger and S. E. Kiliç, 476?480. Istanbul: CIRP.2012
Roeder, I.Zukunftsfähig produzieren weltweitFutur - Vision Innovation Realisierung 2/2012, p. 20?232012
Schau, Erwin M, Ya-Ju Chang, René Scheumann, and Matthias FinkbeinerManufactured Products - Can Their Life Cycle Sustainability Measured? A Case Study of a Bamboo BicycleProceedings of the 10th Global Conference on Sustainable Manufacturing, 736?41. Istanbul, Turkey: Technische Universität Berlin.2012
Scheumann, René, Armin Fügenschuh, Sebastian Schenker, Ingmar Vierhaus, Ralf Borndörfer, and Matthias FinkbeinerGlobal Manufacturing: How to Use Mathematical Optimisation Methods to Transform to Sustainable Value CreationProceedings of the 10th Global Conference on Sustainable Manufacturing, 538-545. Istanbul, Turkey2012
Steingrímsson, Jón G., Steffen Heyer, and Günther SeligerRapid Sustainable Plant Assessment. In Towards implementing sustainable manufacturingProceedings of the 10th Global Conference on Sustainable Manufacturing, ed. Günther Seliger and S. E. Kiliç, 588?593. 31st October - 2nd November 2012, Ankara, Turkey.2012
Uhlmann, E., H. Bochnig, J. Hu, I. M. Ivanov, F. Meister, J. Mewis, L. Prasol, P. Rasper, S. Richarz, A. ZiefleAnalyse und Optimierung von Werkzeugmaschinen und FertigungsprozessenZeitschrift für wissenschaftlichen Fabrikbetrieb 107 7 - 8, pp. 541-5452012
Uhlmann, E., Mewis, J. Rapser, P.Microsystem and Adaptronic Machine Tool Concepts for Global Value CreationProc. of the 10th Global Conference on Sustainable Manufacturing, Instanbul2012
Uhlmann, E.; Fürstmann, P.; Roeder, M., Richarz, S.; Sammler, F.Tool Wear Behaviour of Internally Cooled Tools at Different Cooling Liquid TemperaturesProceedings of the 10th Global Conference on Sustainable Manufacturing, 31 October , Istanbul, Turkey, p. 21 - 272012
Uhlmann, E.; von Wagner, U.; Shi, Y.; Mahr, F.Chatter frequencies of micromilling processes: Influencing factors and online detection via piezoactuatorsInternational Journal of Machine Tools & Manufacture (56): 10-16. doi:10.1016/j.ijmachtools.2011.12.0012012
Wang, W.M.; Woll, R.; Damerau, T.; Lindow, K.; Hayka, H.; Stark, R.IT based concept for collaboration within joint research projects and integration of public communitiesIn 10th Global Conference on Sustainable Manufacturing - Towards implementing sustainable manufacturing: Conference Proceedings, edited by Günther Seliger and S. E. Kiliç, 471?75. Istanbul: CIRP.2012
Y.-J. Chang, E. Schau, M. FinkbeinerApplication of Life Cycle Sustainability Assessment to the Bamboo and Aluminum Bicycle in Surveying Social Risks of Developing CountriesThe Second World Sustainability Forum. http://www.sciforum.net/conference/wsf2/paper/9532012
Barquet, A. P. B., C. Amigo, M. G. Oliveira, V. P. Cunha, and H. RozenfeldEmploying the business model concept to support the adoption of product?service systems (PSS)Industrial Marketing Management 42 (5): 693?704. doi:10.1016/j.indmarman.2013.05.0032013
Barquet, A. P. B., C. Amigo, M. G. Oliveira, V. P. Cunha, and H. RozenfeldEmploying the business model concept to support the adoption of product?service systems (PSS)Industrial Marketing Management 42 (5): 693?704. doi:10.1016/j.indmarman.2013.05.0032013
Beresford Alastair R., Dorothea Kübler and Sören PreibuschPrice versus privacy: an experiment into the competitive advantage of collecting less personal informationB134, Electronic Commerce Research, Vol. 13, Issue 4, 423?455, 20132013
Bilge, PinarEvaluation of the Value Chains' Improvement Towards Productivity and SustainabilityProceedings of the 3rd International Congress on Sustainability Science & Engineering, Cincinnati, OH, USA, August 11-15, 20132013
Brose, A.Systemdynamische Abbildung von Faktoren in der Szenario-TechnikDiploma Thesis, TU Berlin2013
Brose, A., A. Fügenschuh, P. Gausemeier, I. Vierhaus, and G. SeligerA System Dynamic Enhancement for the Scenario TechniqueProceedings of the 11th Global Conference on Sustainable Manufacturing (GCSM), edited by G. Seliger, 561-566. Berlin: Universitätsverlag der TU Berlin.
Gausemeier, P. 2014.
2013
Chang, Ya-ju, Erwin M Schau, Matthias Finkbeiner, and Sabrina Neugebauer.Application of Life Cycle Sustainability Assessment to the Bamboo and Aluminum Bicycles in Surveying Social Risks of Developing CountriesSustainability 5. Basel, Switzerland: Virtual Conference, MDPI. doi:10.3390/su50x000x.2013
Dassisti, M.; Miccoli, V.; Weinaug, H.; Jochem, R.: . In: Krope, Ed. J.; Olabi, AG.; Goricanec, D. (Eds.) Sustainability Assessment of Manufacturing using Business Process Modeling: A Case StudyKrope, Ed. J.; Olabi, AG.; Goricanec, D. (Eds.) Proceedings of 6th Int. Conference on Sustainable Energy and Environmental Protection (SEEP 2013), 20-23 August, Maribor, Slovenia. Publisher. Univ. of Maribor ? Faculty of Chemistry and Chemical Engineering, Smetanova Ulica 17. 2000 Maribor (SLO). 130-137. ISBN: 978-961-248-379-12013
Emec, Soner, Pinar Bilge, and Günther SeligerHybrid System of Energy Production and Water Supply for Sustainable Processing of Agricultural Products: Case Study of Northern CyprusProceedings of the 3rd International Congress on Sustainability Science & Engineering. Cincinnati, OH, USA, August 11-15, 20132013
Emec, Soner, Tim Stock, Pinar Bilge, Philippe Tufinkgi, Cornelia Kaden, and Günther SeligerStudie: Analyse von Potenzialen der Material- und Energieeffizienz in ausgewählten Branchen der Metall verarbeitenden IndustrieBerlin: Verlag VDI Zentrum Ressourceneffizienz2013
Fügenschuh, A., Grösser, S. N., Vierhaus, I.A Global Approach to the Control of an Industry Structure System Dynamics ModelTechnical Report 13-67, ZIB, Takustr.7, 14195 Berlin2013
Fügenschuh, A., van Veldhuizen, R., Vierhaus, I.Production Planning for Non-Cooperating Companies with Nonlinear Optimisation11th Global Conference on Sustainable Manufacturing: Proceedings. 536 ? 541.2013
Fügenschuh, A., Vierhaus, I.System Dynamic Optimisation in the Sustainability Assessment of a World-Model11th Global Conference on Sustainable Manufacturing: Proceedings. 530 ? 535.2013
Heyer, Steffen, Jón G. Steingrímsson, and Günther SeligerIdentification and promotion of effective and efficient product and material cycles via crowdsourcingRe-engineering manufacturing for sustainability: Proceedings of the 20th CIRP International Conference on Life Cycle Engineering, ed. Andrew Y. Nee, Bin Song, and Soh-Khim Ong, 329?33. Singapore: Springer2013
Jochem, R.; Weinaug, H.; Kolomiichuk, S.; Oertwig N.Evaluation of energy and resource efficiency supported by enterprise modelling ? experiences from application cases and their significance for the multi-perspective modelling approachProceedings of the 11th Global Conference on Sustainable Manufacturing. Berlin: Universitätsverlag TU Berlin, 658-665. ISBN: 978-3-7983-2607-12013
Kleinsorge, M., Prieser, M., Nguyen, T. D. and Krüger, J.3D point cloud acquisition using multiple stereo cameras for industrial workplace monitoringProceedings of 3D-NordOst 2013 - 16. Anwendungsbezogener Workshop zur Erfassung, Modellierung, Verarbeitung und Auswertung von 3D-Daten, 37 - 46. GFaI Gesellschaft zur Förderung angewandter Informatik e. V. Berlin2013
Kohl, H., Orth, R., Galeitzke, M.Sustainability Incubators ? A coordinated collaborative approachProceedings of the 11th Global Conference on Sustainable Manufacturing, Universitätsverlag der TU Berlin , pp. 21-26. Seliger, G. (ed.)2013
Kohl, H.; Orth, R.; Riebartsch, O.Sustainability Analysis for Indicator-Based Benchmarking SolutionsProceedings 11th Global Conference on Sustainable Manufacturing, Innovative Solutions. Berlin, Germany, 23.-25. September, 2013. Berlin: Universitätsverlag der TU Berlin, pp. 619-625. In: Seliger, G. (Hrsg.)2013
Kohl, H.; Orth, R.; Wuscher, S.; Will, M. (2013)Challenges for an Integrated IC-based Monitoring System: a multi-stakeholder perspectiveProceedings 8th Knowledge Asset Dynamics (IFKAD), edited by G. Schiuma, J.C Spender, and T. Yigitcanlar, 1498?1508. Zagreb2013
Kolomiichuk, S.; Reggelin, T.; Trojahn, S.; Weinaug, H.Analyse und Verbesserung der Energieeffizienz produzierender KMU am Beispiel von vier russischen KMUTagungsband zur X. Internationalen Wissenschaftlich-Praktischen Konferenz ?Nachhaltige Entwick-lung und effektive Ressourcenpolitik?.Deutsch-Kasachische Universität, Almaty. 253-262. ISBN 978-601-80343-0-52013
Lambrecht, J., Kleinsorge, M., Rosenstrauch, M. and Krüger, J.Spatial Programming for Industrial Robots Through Task DemonstrationInTech - International Journal of Advanced Robotic Systems 10 (254): 1-10. doi: 10.5772/556402013
Lang, K.-D.Next Generation of Electronic Systems-Challenges and Solutions for System Integration TechnologiesIMAPS 2013, Orlando, Florida, USA, 2013
? Keynote IMAPS 2013
2013
Lang, K.-D.Photonische Systemintegration - Chance und HerausforderungFach- und Publikumsmesse für Glasfasertechnik, Berlin, 24.4. - 25.4.2013, 2013
? Keynote BEL2 2013
2013
Lehmann, Annekatrin, René Scheumann, and Matthias FinkbeinerUse of SLCA for a Comparative Sustainability Analysis of TechnologiesInternational Seminar on Social LCA. Montreal2013
Lindow K, Heimann O, Adolphy S, Hayka H, Stark R.Decision-Making Support for Sustainable Product DevelopmentAbramovici M, Stark R, editors. Smart Product Engineering: Springer Berlin Heidelberg; p. 979-9882013
Lindow K, Woll R, Stark R.Developing Sustainable Products: An Interdisciplinary ChallengeChakrabarti A, Prakash RV, editors. ICoRD'13: Springer India; , p. 517-5272013
Lindow, K.; Nguyen, H.N.; Hayka, H.; Stark, R.Contribution to sustainable product development by means of knowledge assets integrated into a PDM-systemProduct Lifecycle Management- Virtual Product Lifecycles for Green Products and Services, Maj Enginee Verlag, Eindhoven, The Netherlands2013
McFarland, R.; Reise, C.; Postawa, A.; Seliger, G.Learnstruments in value creation and learning centered work place designProcedia CIRP, Proceedings of the 11th Global Conference on Sustainable Manufacturing (GCSM): 624-6292013
Minton, T., S. Ghani, F. Sammler, R. Bateman, P. Fürstmann and M. RoederTemperature of internally-cooled diamond-coated tools for dry-cutting titaniumInternational Journal of Machine Tools & Manufacture 75: 27?352013
Neugebauer, S.; Chang, Y.; Maliszewski, M.; Lindow, K.; Stark, R.; Finkbeiner, M.Life Cycle Sustainability Assessment & Sustainable Product Development: A Case Study on Pedal Electric Cycles (Pedelec)Proceedings of the 11th Global Conference on Sustainable Manufacturing (GCSM 2013) - Innovative Solutions, 549-554. 23-25 September, Berlin2013
Nguyen, T. D., Kleinsorge, M. and Krüger, J.Pose classification using Kinect Sensor for Ergonomics3D-NordOst 2013 ? 16 In Proceedings of 3D-NordOst 2013 - 16. Anwendungsbezogener Workshop zur Erfassung, Modellierung, Verarbeitung und Auswertung von 3D-Daten, 125 ? 133. GFaI Gesellschaft zur Förderung angewandter Informatik e. V. Berlin.2013
Nguyen, The Duy, Martin Kleinsorge, Aleksandra Postawa, Kirana Wolf, René Scheumann, Jörg Krüger, and Günther SeligerHuman Centric Automation: Using Marker-less Motion Capturing for Ergonomics Analysis and Work Assistance in Manufacturing ProcessesGCSM Proccedings - Innovative Solutions, edited by Günther Seliger, 639?45. Berlin, Germany2013
Orth, R.; Kohl, H. ():. In: Garcia, L.; Rodriguez-Castellanos, A.; Barrutia-Guenaga, J. (Hrsg.)Towards Corporate Sustainability - A Small and Medium-Sized Enterprise PerspectiveProceedings 5th European Conference on Intellectual Capital, edited by L. Garcia, A. Rodriguez-Castellanos, and J. Barrutia-Guenaga, 323?332. Reading: ACPI Ltd.2013
Peukert, B., Mewis, J., Saoji, M., Uhlmann, E., Benecke, S., Thomasius, R., Nissen, N.F., Lang, K.-D.Microsystem enhanced machine tool structures to support sustainable value creationProc. of the 11th Global Conference on Sustainable Manufacturing, pp. 580-585, Berlin2013
Postawa, A.Werker-Assistenz und -Qualifizierung für manuelle (De-)Montage durch bild- und schriftgestützte Visualisierung am ArbeitsplatzDissertation, TU Berlin, Fraunhofer IPK (Hrsg.), Berlin2013
Radebach, A., H. Schult, J. C. SteckelMacroeconomic Sustainability AssessmentGlobal Conference on Sustainable Manufacturing, Berlin, Germany, September 23-25, 20132013
Radebach, A., H. Schult, J. C. SteckelRefining the Product SpaceNetSci ? International School and Conference on Network Science, Copenhagen, Denmark, June 3-7, 20132013
Reise, C., M. GeyerOpen design for sustainable manufacturing ? Concepts, projects and future challengesJawahir (edit.): International Journal of Sustainable Manufacturing2013
Sabrina Neugebauer, Ya-Ju Chang, Markus Maliszewski, Kai Lindow, Rainer Stark, Matthias FinkbeinerLife Cycle Sustainability Assessment & Sustainable Product Development: A Case Study on Pedal Electric Cycles (Pedelec)Proceedings of 11th Global Conference on Sustainable Manufacturing, September 23-25, Berlin, Germany, ISBN: 978-3-7983-2608-82013
Sabrina Neugebauer, Ya-Ju Chang, Matthias FinkbeinerGaps in assessing sustainability and proposal of a tiered approachProceedings of the 6th International Conference on Life Cycle Management, August 25-28, Gothenburg, Sweden, ISBN: 978-91-980973-5-12013
Scheumann, René, Ingmar Vierhaus, Ya-Ju Chang, Armin Fügenschuh, and Matthias FinkbeinerIdentification of Trade-offs for Sustainable Manufacturing of a Bamboo Bike by System DynamicsProceedings of the 27th EnviroInfo 2013 Conference, edited by Bernd Page, Andreas G. Fleischer, Johannes Göbel, and Volker Wohlgemuth, 539?47. Hamburg, Germany: Shaker Verlag, Aachen.2013
Scheumann, René, Kirana Wolf, Ya-Ju Chang, Sabrina Neugebauer, and Matthias FinkbeinerA New Indicator Framework for LCSA Considering Safeguard SubjectsAbstract Book of the SETAC Europe 23rd Annual Meeting. Glasgow, Scotland: SETAC Europe. http://meetings.setac.org/glasgow_abstracts.2013
Send, H.; Friesike, S.; Nina Zuch, A.; Steingrímsson, J.G.; Seliger, G.Crowdmanu-facturing and Open Hardware: Researching Value Creation in a new Manufacturing Paradigm, its Actors and Business ModelsProceedings of the 11th Global Conference on Sustainable Manu-facturing, GCSM . 25th? 27th September, 2013, Berlin2013
Send, Hendrik, Sascha Friesike, Ayca Nina Zuch, Jón G. Steingrímsson, and Günther SeligerValue Creation in Open Source Hardware Models.Innovative solutions: 11th Global Conference on Sustainable Manufacturing, ed. Günther Seliger, 594?600. Berlin, Germany: Universitätsverlag der TU Berlin.2013
Steckel, J. C., Brecha, R. J., Jakob, M., Strefler, J., & Luderer, G.Development without energy? Assessing future scenarios of energy consumption in developing countriesEcological Economics, 90, 53-672013
Steckel, Jan, Ulrike Kornek, Kai Lessmann, Ottmar EdenhoferThe Climate rent curse: New challenges for burden sharingConference Paper, European Association of Environmental and Resource Economists, 20th Annual Conference, June 29, 2013, Toulouse2013
Steingrímsson, J. G.; Weinaug, H.; Oertwig, N.Rapid Sustainable Plant Assessment (RSPA) ? experiences of practical application and their impact on the further developmentProceedings of the 11th Global Conference on Sustainable Manufacturing. Berlin: Universitätsverlag TU Berlin, 652-657. ISBN: 978-3-7983-2607-12013
Steingrímsson, Jón G., and Günther Seliger.
Sourcing Automation to the Crowds ? by means of Low Cost Technical SolutionsInnovative solutions: 11th Global Conference on Sustainable Manufacturing, ed. Günther Seliger, 671?676. Berlin, Germany: Universitätsverlag der TU Berlin.2013
Uhlmann, E., and S. RicharzInnovative Fertigungsverfahren und WerkzeugkonzepteProceedings of the 28. Industriearbeitskreis Werkzeugbeschichtungen und Schneidstoffe, edited by E. Uhlmann, 1?30. Berlin: Eigenverlag2013
Uhlmann, E., N. Raue and C. GabrielFlexible Implementation of IPS 2 through a Service-based Automation Approach2nd International Through-life Engineering Services Conference / Procedia CIRP 11. pp. 108-1132013
Uhlmann, E.; Kianinejad, K.Investigation of the upgrading potentials of out-of-date cutting machine tools to promote sustainable and global value creation. In Onnovate Solutions11th Global Conference an Sustainable Manufacturing. Ed.: Seliger, G.: University publisher of TU Berlin,, p. 63.2013
Van Veldhuizen, RoelThe Influence of Wages on Public Officials? Corruptibility: a Laboratory InvestigationJournal of Economic Psychology, Vol. 39, 341?3562013
Vierhaus, I., Fügenschuh, A.A Global Approach to the Optimal Control of System Dynamics ModelsProceedings of the 31st International Conference of the System Dynamics Society.2013
Wang, W.M.; Pförtner, A.; Lindow, K.; Hayka, H.; Stark, R.Using Ontology to Support Scientific Interdisciplinary Collaboration within Joint Sustainability Research ProjectsProceedings of the 11th Global Conference on Sustainable Manufacturing: Innovative Solutions, ed-ited by Günther Seliger, 612?17. Berlin: Universitätsverlag der TU Berlin2013
Wardle, F.; T. Minton, S. Ghani, P. F?rstmann, M. Roeder, S. Richarz and F. SammlerArtificial Neural Networks for Controlling the Temperature of Internally Cooled Turning ToolsModern Mechanical Engineering 3 (2A): 1?10. ISSN Online: 2164-01812013
Wolf, Kirana, Ya-Ju Chang, René Scheumann, Sabrina Neugebauer, Annekatrin Lehmann, and Matthias FinkbeinerWhat Do We Assess for a Sustainable Society from a Manufacturing Perspective?GCSM Proceedings - Innovative Solutions Proceedings, edited by Günther Seliger, 577?81. Berlin, Germany2013
Y.-J. Chang, K. Wolf, S. Neugebauer, R. Scheumann, M. FinkbeinerThe next step for social Life Cycle AssessmentThe Third Asian Conference on Sustainability, Energy and the Environment, June 6-9, Osaka, Japan2013
Y.-J. Chang, S. Neugebauer, M. FinkbeinerLife Cycle Sustainability Assessment (LCSA) comparison of modern bikesThe 6th International Conference on Life Cycle Management2013
Becker, Frank, René Scheumann, and Johannes DietrichAbschied Vom AbfallReSource 27 (4). Rhombos-Verlag, Berlin: 47?532014
Bilge, Pinar, Fazleena Badurdeen, Günther Seliger, and I. S. JawahirModel-based approach for assessing value creation to enhance sustainability in manufacturingVariety Management in Manufacturing: Proceedings of the 47th CIRP Conference on Manufacturing Systems, ed. Hoda ElMaraghy, 106?11: Elsevier2014
Buchert, T., Halstenberg, F.A., Adolphy, S., Lindow,K., Stark, R.Wissensbasierte nachhaltige Produktentwicklung - Systematische Auswahl und Kombination von Methoden zur Entscheidungsunterstützungpresented at the 25th Design for X Symposium, Bamberg, 01-02 October2014
Buchert, T., Neugebauer, S., Schenker, S., Lindow, K., Stark, R.Multi-criteria Decision Making as a Tool for Sustainable Product Development ? Benefits and ObstaclesProcedia CIRP 26: 70-75. doi: 10.1016/j.procir.2014.07.1102014
Buchert, T.; Kaluza, A.; Halstenberg, F. A.; Lindow, K.; Hayka, H.; Stark, R.Enabling Product Development Engineers to Select and Combine Methods for Sustainable DesignProceedings of the 21st CIRP Conference on Life Cycle Engineering. CIRP 15: 413?418. doi:10.1016/j.procir.2014.06.025.2014
Duffy, John and Dietmar FehrEquilibrium Selection in Similar Repeated Games: Experimental Evidence on the Role of PrecedentsWZB Discussion Paper SP II 2015-2022014
Edenhofer, O., Steckel, J. C., & Jakob, M.Does Environmental Sustainability Contradict Prosperity?Global Policy, 5(s1), 15-202014
Finkbeiner, Matthias, Robert Ackermann, Vanessa Bach, Markus Berger, Gerhard Brankatschk, Ya-ju Chang, Marina Grinberg, et al.Challenges in Life Cycle Assessment: An Overview of Current Gaps and Research NeedsBackground and Future Prospects in Life Cycle Assessment, edited by Walter Klöpffer, 207?58. Dordrecht: Springer Netherlands.2014
Forin, Silvia, Jan Christoph Steckel, Alexander Radebach, and Hauke SchultIntra-Sectoral Efficiency Gains vs Delocalization: A Decomposition Analysis of Global Energy Intensity between 2001 and 2007Proceedings of the International Association of Energy Economics? Regional Conference. Rome. www.iaee.org/en/publications/proceedingsabstractpdf.aspx?id=12340.2014
Gausemeier, P.Nachhaltige Technologiepfade für unterschiedliche EntwicklungsniveausStuttgart: Fraunhofer Verlag2014
Gausemeier, P., J. Seidel, T. Riedelsheimer, and G. SeligerPathways for sustainable technology development - The case of bicycle mobility in BerlinProceedings of the 12th Global Conference on Sustainable Manufacturing (GCSM) CIRP 26: 202-207. doi:10.1016/j.procir.2014.07.1642014
Guidat, T., A.P. Barquet, H. Widera, H. Rozenfeld, G. SeligerGuidelines for the Definition of Innovative Industrial Product-Service Systems (PSS) Business Models for RemanufacturingProcedia CIRP. Product Services Systems and Value Creation. Proceedings of the 6th CIRP Conference on Industrial Product-Service Systems. Volume 16, 2014, Pages 193?1982014
Heinze, C., T. Michael, et al.Microcrack Formation During Gas Metal Arc Welding of High-Strength Fine-Grained Structural SteelActa Metallurgica Sinica (English Letters) 27(1): 140-148. doi:10.1007/s40195-013-0011-52014
Helm, R., C. Reise, Rößle, D.Learning factories for sustainable manufacturing ? a generic design approachAdvanced Materials Research 1018: 517-524. doi: 10.4028/www.scientific.net/AMR.1018.517.2014
Heyer, S.Community-based design of process chains for manufacturing and recy-clingTechnische Universität Berlin, PhD. Thesis2014
Hu, JialiangProduct-service systems enabling for sustainable city mobilityTechnische Universität Berlin, PhD. Thesis2014
Jakob, Michael, and Jan Christoph SteckelHow Climate Change Mitigation Could Harm Development in Poor CountriesWIREs Climate Change 5: 161?682014
Jakob, Michael, Jan Christoph Steckel, and Ottmar EdenhoferConsumption- Versus Production-Based Emission PoliciesAnnual Review of Resource Economics 6: 297?318. doi:10.1146/annurev-resource-100913-0123422014
Jakob, Michael, Jan Christoph Steckel, Stephan Klasen, Jann Lay, Nicole Grunewald, Inmaculada Martínez-Zarzoso, Sebastian Renner, and Ottmar EdenhoferFeasible Mitigation Actions in Developing CountriesNature Climate Change 4: 961?682014
Kohl, H., Galeitzke, M., Steinhöfel, E., Orth, R.Strategic Intellectual Capital Management as a Driver of Organisational InnovationProceedings of the 9th International Forum on Knowledge Assets (IFKAD), Matera, Italy, on 11-13 June 2014. pp. 1481-1495. Spender, JC., Giovanni Schiuma and Vito Albino (eds.).2014
Kohl, H., M. El-TobguiThe Egyptian Science, Research and Technology Landscape: An Evaluation for the Design of Innovation Policies and StrategiesEgyptian German Science Monitor, Issue 1.2014
Lang, K.-D.Advanced Electronic Systems ? From Idea to ProductCommercialization of Micro, Nano, and Emerging Technologies Conference nanoUtah (COMS 2014), Salt Lake City, Utah, USA, 2014
? Keynote COMS nanoUtah
2014
Lars Wolter, Wei Min Wang, Rainer StarkInformation Systems to support collaboration in large research projectsInternational Journal of Modeling and Optimization 4(3), IACSIT, S. 251-256. doi:10.7763/IJMO.2014.V4.3822014
Lei, L.; Kohl, H.; Xu, Y.The adaptation research about ICS and Chinese management scenarioNankai Business Review International 5 (4), pp. 394-4102014
McFarland, R.Learnstruments: Lernförderliche Arbeitsmittel für die MontageFutur Vision Innovation Realisierung, 01/2014, pp. 22-232014
Middendorf, A., Benecke, S., Nissen, N. F., Wittler, O., Lang, K.-D.Establishing EcoReliability of Electronic Devices in Manufacturing EnvironmentsProc. of the 12th Global Conference on Sustainable Manufacturing, Johor Barhu, pp. XXX-XXX. [will be update in final version]2014
Muschard, B.FabLab. Nachhaltigkeit durch BildungFutur - Vision Innovation Realisierung 3/2014, p.18-192014
Neugebauer, Sabrina, Marzia Traverso, René Scheumann, Ya-Ju Chang, Kirana Wolf, and Matthias FinkbeinerImpact Pathways to Address Social Well-being and Social Justice in SLCA ? Fair Wage and Level of EducationSustainability, 6(8), pp. 4839-48572014
Nguyen, T. D., Kleinsorge, M., & Kruger, J.ErgoAssist: An assistance system to maintain ergonomic guidelines at workplacesEmerging Technology and Factory Automation (ETFA), 2014 IEEE, 1?4. IEEE. http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=7005258.2014
Nguyen, T. D., Kleinsorge, M., and Krüger, J.A System for Automated Live Ergonomics Assessment and Its Applications in ManufacturingAdvances in Physical Ergonomics and Human Factors: Part I 14: 211 ? 221.2014
Oertwig, N.; Wintrich, N.; Jochem, R.Model-based Evaluation Environment for SustainabilityProceedings of 12th Global Conference on Sustainable Manufacturing. Johor Bahru: 641?645. doi:10.1016/j.procir.2014.07.0972014
Peukert, B., Saoji, M., UhlmannAn evaluation of building sets designed for modular machine tool structures to support sustainable manufacturingProc. of the 12th Global Conference on Sustainable Manufacturing, Johor Barhu, pp. XXX-XXX. [will be update in final version]2014
Pförtner A, Stark, R, Hayka HInformation processing options for sustainable product developmentTools and Methods of Competitive Engineering: Digital Proceedings of the Tenth International Symposium on Tools and Methods of Competitive Engineering (TMCE 2014), edited by Z. Rusak, I. Horvath, 527 ? 538. Ancona: Eurotech-Verlag.2014
Radebach, A., H. Schult, J. C. SteckelSimilarity networks from MRIO tablesInternational Input-Output Conference, Lisbon, Portugal, July 14-18, 20142014
Reise, C., B. Müller, G. SeligerResource Efficiency Learning Game ? electric Scooter GameCIRP Journal of Manufacturing Science and Technology (CIRP-JMST), Procedia CIRP 15: 355-360. doi:10.1016/j.procir.2014.06.090.2014
Roeder, I.Teaching Sustainable Manufacturing WorldwideFutur - Vision Innovation Realization 1-3/2014, p. 29?312014
Schenker, S., Steingr?msson, J.G., Borndörfer, R., Seliger, G.Modelling of Bicycle Manufacturing via Multi-Criteria Mixed Integer ProgrammingProcedia CIRP 26: 276-280. doi: 10.1016/j.procir.2014.07.0682014
Scheumann, René, and Frank BeckerBenefit of Re-use of IT Hardware for Society and Environment ? a German Business CaseIn Paper Book: Living Knowledge Conference, edited by Sosser Brodersen, Jens Dorland, and Michael Jorgensen, 293?303. Copenhagen, Denmark2014
Scheumann, René, and Robert AckermannDas Schutzgut Man-Made Environment Und Sein Einfluss Auf UVP, Ökobilanz, Risikomanagement Und Nachhaltigkeit.Simulation in Den Umwelt- Und Geowissenschaften, edited by Jochen Wittmann and Dimitris Maretis. Osnabrück2014
Scheumann, René, Julia Martínez-Blanco, Kirana Wolf, Ya-ju Chang, and Sabrina NeugebauerImpact Pathway Characterisation to Evaluate Sustainability Performance of Products by Addressing Six Safeguard SubjectsAbstract Book of the SETAC Europe 24th Annual Meeting. Basel, Switzerland2014
Scheumann, René, Sabrina Neugebauer, Kirana Wolf, Ya-Ju Chang, and Matthias FinkbeinerSix Safeguard Subjects for Life Cycle Sustainability AssessmentJournal of Cleaner Production submitted & under review2014
Schult, Hauke, Alexander Radebach, Ingmar Vierhaus, Armin Fügenschuh, and Jan Christoph SteckelAn Input-Output Based Approach to Explore Hidden Potentials in Global Production Chainspresented at the 22nd International Input-Output Conference, Lisbon, Portugal, July 142014
Severengiz, Mustafa, Johannes Seidel, Jón G. Steingrímsson, and Günther SeligerEnhancing Technological Innovation with the Implementation of a Sustainable Manufacturing CommunityProceedings of the 12th Global Conference on Sustainable Manufacturing, GCSM 2014. 21st? 24th September, Johor Bahru, Malysia. Procedia CIRP 26: 52?57. doi: 10.1016/j.procir.2014.07.177.2014
Stark, R., Wang, W.M., Pförtner A., Hayka, H.Einsatz von Ontologien zur Vernetzung von Wissensdomänen in der nachhaltigen Produktentstehung am Beispiel des Sonderforschungsbereiches 1026 ? Sustainable ManufacturingEntwerfen. Entwickeln. Erleben. Beiträge zur virtuellen Produktentwicklung und Konstruktionstechnik. Dresden: TU Dresden, 451-4632014
Steckel, Jan Christoph, Ottmar Edenhofer, and Michael JakobWhat Drives the Renaissance of Coal?Paper presented at the International Energy Workshop in Beijing, June 4 ? 6 20142014
Steffen Heyer1,#, Nariaki Nishino², Bernd Muschard1, and Günther Seliger1Enabling of local Value Creation via Openness for
Emergent Synthesis
International Journal of Precision Engineering and Manufacturing. Vol. 15, No. 7, pp. 1-52014
Steingrímsson, Jón G., and Günther Seliger.
Conceptual Framework for Near-to-site Waste Cycle DesignProceedings of the 21st CIRP conference on Life Cycle Engineering, ed. Terje Lien, 272-277. 18th-20th June, Trondheim, Norway.

Procedia CIRP 15: 272-277.
doi: 10.1016/j.procir.2014.06.014.
2014
Uhlmann, E. and F. OttoProcesses for the Introduction of the Maintenance Service Support System6th CIRP IPS2 / Procedia CIRP 16, pp. 332-3372014
Uhlmann, E. and P. FürstmannMehr Funktion für mehr Effizienz. Neues Werkzeug für die DrehbearbeitungFUTUR ? Vision, Innovation und Realisierung 3: 8?92014
Uhlmann, E. and P. FürstmannMore Functions for More Efficiency. A New Turning Tool DesignFUTUR ? Vision, Innovation and Realizaton 1: 16?172014
Uhlmann, E. and P. FürstmannPräziser Laser. Verschleiß messen im ProzessFUTUR ? Vision, Innovation und Realisierung 3: 10?112014
Uhlmann, E. and P. FürstmannPrecision Laser. Measurement of Wear during MachiningFUTUR ? Vision, Innovation and Realizaton 1: 16?172014
Uhlmann, E., P. Fürstmann, R. Hollan, B. Peukert, and K. Kianinejad.Sustainable Manufacturing - Advanced Machine Tool Components and Efficient Process.Symposium, Karlsruhe.2014
Uhlmann, E., Saoji, M., Peukert, B.Optimierte Sensorplatzierung in Mess-Netzwerkenwt Werkstatttechnik online, Volume 104, Issue 5, pp. 266-2712014
Uhlmann, E.; Fürstmann, P.Onlinemessung der Verschleißmarkenbreite. Verschleißentwicklung während des Längs-Runddrehens mittels Lasertriangulation bestimmenwt Werkstattstechnik online 104 () 11/12, p. 741 - 7462014
Van Veldhuizen, Roel and Joep SonnemansNonrenewable Resources, Strategic Behavior and the Hotelling Rule: An ExperimentWZB Discussion Paper SP II 2014-2032014
Van Veldhuizen, Roel, Oosterbeek, Hessel and Joep SonnemansPeers at Work: from the Field to the LabWZB Discussion Paper SP II 2014-2042014
Vierhaus, I., Fügenschuh, A., Gottwald, R., Grösser, S.Modern Nonlinear Optimisation Techniques for an Optimal Control of System Dynamics ModelsProceedings of the 32nd International Conference of the System Dynamics Society.2014
Wang, W.M.; Wolter, L., Lindow, K.; Stark, R.Graphical Visualization of Sustainable Manufacturing Aspects for Knowledge Transfer to Public Audiencevariety Management in Manufacturing: Proceedings of the 47th CIRP Conference on Manufacturing Systems, ed. Hoda ElMaraghy, 106?11: Elsevier. Procedia CIRP 26: 58?632014
Wenz, L., S.N. Willner, A. Radebach, R. Bierkandt, J. C. Steckel, A. LevermannAn inhomogeneous approximation-and-update approach to refine multi-regional input-output tablesInternational Input-Output Conference, Lisbon, Portugal, July 14-18, 20142014
Widera, H.Geschäftsmodelle der Wiederaufbereitung für Hersteller von OriginalteilenTechnische Universität Berlin, PhD. Thesis2014
Wolf, Kirana, René Scheumann, and Matthias FinkbeinerLife Cycle Sustainability Assessment in Support of Sustainable Life Styles11th Asia Pacific Roundtable for Sustainable Consumption and Production (APRSCP). Bangkok, Thailand2014
Wolf, Kirana, René Scheumann, and Matthias FinkbeinerSustainability framework for food, bioenergy and agricultural developmentInternational Conference on Sustainable Agriculture, Food, and Energy (SAFE2014). Bali, Indonesia2014
Wu, C. F., Lin, S. K., Lambrecht, J., Nguyen, T. D., Vick, A., Kleinsorge, M., & Kruger, J. . ?.? Paper presented at theIntegrated object and path demonstration for industrial robots in adaptive handling applicationsEmerging Technology and Factory Automation (ETFA), 2014 IEEE, 1?4. IEEE. http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=70052502014
Barquet, A. P. B.Creation of Product-service systems (PSS) proposals in the fuzzy front-end224f. PhD diss., University of São Paulo, Brazil2015
Barquet, A. P. B., J. G. Steingrímsson, G. Seliger, H. RozenfeldMethod to Create Proposals for PSS Business Models.CIRP, Volume 30, 2015, Pages 13-17, Proceedings of 7th Industrial Product-Service Systems Conference - PSS, industry transformation for sustainability and business2015
Barquet, A.P.,Seidel, J., Buchert, T., Galeitzke, M., Neugebauer, S., Oertwig, N., Rozenfeld, H., Seliger, G.Sustainable product service systems ? from concept creation to the detailing of a business model for a bicycle sharing system in BerlinGlobal Conference on Sustainable Manufacturing, Ho Chi Minh City / Binh Duong 16th-18th September 2015 (forthcoming)2015
Becker, Frank, René Scheumann, Johannes Dietrich, Gerhard KastKann das weg ? oder ist das Re-use?Nachhaltiger Konsum durch soziale Innovationen ? Perspektiven aus Wissenschaft und Praxis? Herausgeberinnen: Melanie Jaeger-Erben, Jana Rückert-John, Martina Schäfer; Verlag: Springer VS, Reihe ?Innovation und Gesellschaft? des Instituts für Sozialinnovation2015
Benecke, S., N. F. Nissen and K.-D. LangMission Profile Oriented Design for Energy Harvesting Systems to Reduce Environmental Impacts of Autonomous SensorsTokyo Ecodesign 2015
? Ecodesign2015 #2: Status: In preparation ? peer reviewed conference
2015
Benecke, S., S. Neugebauer, B. Peukert, M. Finkbeiner, E. Uhlmann, N. F. Nissen and K.-D. LangSustainability Assessment for Wireless Microsystems in Smart Manufacturing EnvironmentsEcoDesign 2015, Tokyo [will be update in final version]2015
Bilge, Pinar, Fazleena Badurdeen, Günther Seliger, and I. S. JawahirConceptual modelling to improve sustainable value creationInternational Journal of Strategic Engineering Asset Management Special Issue2015
Bonvoisin, J., J.-F. BoujutOpen design platforms for open source product development: current state and requirementsICED 2015 , Design for Life, July 27-30, Milan, Italy (accepted)2015
Buchert, Tom, Jón G. Steingrímsson, Sabina Neugebauer, The Duy Nguyen, Mila Galeitzke, Nicole Oertwig, Johannes Seidel, Randy McFarland, Kai Lindow, Haygazun Hayka, and Rainer Stark
Design and manufacturing of a sustainable pedelecProceeding of the 22nd CIRP International Conference on Life Cycle Engineering. Sydney, Australia, , 07-09 April, Procedia CIRP, Vol. 29, p. 579?584, 20152015
Chang, Y.-J., Nguyen, T. D., Finkbeiner, M., and Krüger, J.Adapting ergonomic assessments to Social Life Cycle AssessmentPaper accepted in the 13th CIRP Sponsored Global Conference on Sustainable Manufacturing. Ho Chi Minh City / Binh Duong, Vietnam. September 16th - 18th2015
Chang, Ya-Ju, Gunther Sproesser, Sabrina Neugebauer, Kirana Wolf, René Scheumann, Andreas Pittner, Michael Rethmeier, and Matthias FinkbeinerEnvironmental and Social Life Cycle Assessment of Welding TechnologiesEnvironmental and Social Life Cycle Assessment of Welding Technologies.? Procedia CIRP 26: 293?98/ 12th GCSM2015
Chang, Ya-ju, Matthias FinkbeinerEvaluating sustainable development from a child?s perspective - a proposal of Sustainable Child Development Index (SCDI).Proceedings of the 13th CIRP Sponsored Global Conference on Sustainable Manufacturing. Ho Chi Minh City / Binh Duong, Vietnam. September 16th - 18th.2015
Chen, Danfang, Steffen Heyer, Suphunnika Ibbotson, Konstantinos Salonitis, Jón G. Steingrímsson, and Sebastian ThiedeDirect digital manufacturing: Definition, evolution and sustainability implicationsJournal of cleaner production, xxx, 1-11, 20152015
De Haan, Thomas and Roel van VeldhuizenWillpower Depletion and Framing EffectsJournal of Economic Behavior and Organization (forthcoming). Accepted2015
E. UhlmannProduktion von MorgenIn Proceedings of the 32. Industriearbeitskreis Werkzeugbeschichtungen und Schneidstoffe, edited by E. Uhlmann, 1?48. Berlin: Eigenverlag2015
Emec, Soner; Pinar Bilge, and Günther SeligerDesign of Production Systems with Hybrid Energy and Water Generation for Sustainable Value CreationClean Technologies and Environmental Policy. [In press]2015
Fabry, C., A. Pittner, et al.Datenerfassung und ?analyse zur Prozessüberwachung und ?regelung von MSG-LichtbogenverfahrenDVS-Berichte Band 315, edited by DVS - Deutscher Verband für Schweißen und verwandte Verfahren e.V.. Düsseldorf: DVS Media. Contribution accepted (paper and proof of acceptance will be provided supplementary).2015
Galeitzke, M, Steinhöfel, E., Orth, R., Kohl, H.Fostering Organisational Innovation through Intellectual Capital ManagementProceedings of the 10th International Forum on Knowledge Assets (IFKAD), Bari, Italy 10th ? 12th June 2015. pp. 476 ? 489. Spender, JC., Giovanni Schiuma and Vito Albino (eds.).2015
Galeitzke, M., Oertwig, N., Orth, R., Kohl, H.Process-oriented design methodology for the (inter-) organizational intellectual capital managementGlobal Conference on Sustainable Manufacturing, Ho Chi Minh City / Binh Duong 16th-18th September 2015 (forthcoming)2015
Halstenberg, F.A., Buchert, T., Bonvoisin, J., Lindow,K., Stark, R.Target-oriented Modularization? Addressing Sustainability Design Goals in Product ModularizationProceedings of the 22nd CIRP Conference on Life Cycle Engineering. CIRP 29: 603?608. doi:10.1016/j.procir.2015.02.166.2015
Jakob, Michael, Dorothea Kübler, Jan Christoph Steckel, Roel van VeldhuizenClean up your own mess!Poster presented at Summer Institute on Bounded Rationality, Homo Heuristicus in the Economy. Max Planck Institute for Human Development. Berlin, June 4?11, 20152015
Jakob, Michael, Jan Christoph Steckel, Christian Flachsland, and Lavinia BaumstarkClimate Finance for Developing Country Mitigation: Blessing or Curse?Climate and Development 7 (1): 1?152015
Kianinejad, K., S. Thom, S. Kushwaha, and E. UhlmannAdd-on Error Compensation Unit as Sustainable Solution for Outdated Milling MachinesAbstract accepted and submitted for 13th Global Conference on Sustainable Manufacturing.
(accepted)
2015
Kianinejad, K., S. Thom, S. Kushwaha, P. Rathenow, and E. UhlmannEntwicklung eines aktiven Kompensationstischeswt-online.2015
Kianinejad, K.; Uhlmann, E.; Peukert, B.Investigation into Energy Efficency of Outdated Cutting Machine Tools and Identification of Improvement Potentials to Promote Sustainability12th Global Conference on Sustainable Manufacturing pp. 1 ? 6; Procedia CIRP (26): 533 538. doi:10.1016/j.procir.2014.07.0832015
Kohl, H., Galeitzke, M., Steinhöfel, E., Orth, R. (forthcoming)Strategic Intellectual Capital Management as a Driver of Organisational InnovationInt. Journal of Knowledge and Learning. Special Issue: "Knowledge Management at the Crossroads Research, Challenges and Perspectives" (forthcoming)2015
Kohl, H., Orth, R., Riebartsch, O., Galeitzke, M., Cap, J.-P.Support of Innovation Networks in Manufacturing Industries Through Identification of Sustainable Collaboration Potential and Best-Practice TransferProceedings 12th Global Conference on Sustainable Manufacturing (GCSM) - Emerging Potentials, edited by G. Seliger and N. M. Yusof, 185?89. Procedia CIRP 262015
Krüger, J., Nguyen, T. D.Automated vision based live ergonomics analysis in assembly operationsCIRP Annals - Manufacturing Technology, May: 1 ? 4. doi:10.1016/j.cirp.2015.04.046.2015
Lang, K.-D.Advanced Integration Technologies - Challenges and Solutions Concerning Cyber Physical SystemsSMTA Pan Pacific Microelectronics Symposium, Hawaii, USA, 20152015
Lehmann, Martin, N. Bocken; Jón G. Steingrímsson; S. EvansIncorporating design thinking into sustainable business modelling2nd International Conference on Sustainable Design and Manufacturing. Seville, Spain2015
Mehmet, Ça?r? Köse, Jón G. Steingrímsson, Julia Schmid, Roel van Veldhuizen, Dorothea Kübler, and Günther SeligerThe perspectives of overcompliance from the viewpoint of sustainable urban mobility [Accepted paper]13th Global Conference on Sustainable Manufacturing. 16th-18th September, 2015, Ho Chi Minh City / Binh Duong, Vietnam.2015
Miehe, Robert, René Scheumann, Christopher M. Jones, Daniel M. Kammen, and Matthias Finkbei-nerRegional Carbon Footprints of Households: a German Case StudyEnvironment, Development and Sustainability. Springer Netherlands, 1?15. doi:10.1007/s10668-015-9649-72015
Müller, B., C. Reise, B.M. Duc, and G. SeligerSimulation-games for learning conducive
workplaces: a case study for manual assembly
Procedia CIRP 002015
Müller, B., C. Reise, G. SeligerGamification in Factory Management Education ? A Case Study with Lego MindstormsProcedia CIRP 26, Proceedings of the 12th Global Conference on Sustainable Manufacturing (GCSM): 121-126. doi: 10.1016/j.procir.2014.07.1002015
Muschard, B.; Seliger, G.Realization of a learning environment to promote sustainable value creation in areas with insufficient infrastructureProceedings of the 5th CIRP Conference on Learning Factories.2015
Neugebauer, Sabrina, Julia Martinez Blanco, René Scheumann, and Matthias FinkbeinerEnhancing the Practical Implementation of Life Cycle Sustainability Assessment - Proposal of a Tiered ApproachJournal of Cleaner Production. doi: 10.1016/j.jclepro.2015.04.0532015
Nguyen, T. D., McFarland, R., Kleinsorge, M., Krüger, J. and Seliger, G.Adaptive qualification and assistance modules for manual assembly workplacesProcedia CIRP 26: 115 ? 120. doi:10.1016/j.procir.2014.07.117.2015
Orth, Ronald, René Scheumann, Mila Galeitzke, Kirana Wolf, Holger Kohl, and Matthias FinkbeinerSustainable Corporate Development Measured by Intangible and Tangible Resources as Well as Targeted by Safeguard SubjectsProcedia CIRP 26: 630?342015
Peukert, B., Benecke, S., Clavell, J., Neugebauer, S., Nissen, N.F., Uhlmann, E., Lang, K.-D., Finkbeiner, M.Addressing sustainability and flexibility in manufacturing via smart modular machine tool frames to support sustainable value creationProc. of the 22th CIRP conference on Life Cycle Engineering, Sydney, pp. XXX-XXX. [will be update in final version]2015
Pittner, A., V. Karkhin, et al.Reconstruction of 3D transient Temperature Field for Fusion Welding Processes on Basis of Discrete Experimental DataWelding in the World. Published online: 10 February 2015. doi:10.1007/s40194-015-0225-42015
Radebach, A., H. Schult, J. C. SteckelEconomic similarity networks for sustainability assessmentNetSci ? International School and Conference on Network Science, Zaragoza, Spain, June 1-5, 20152015
Radebach, Alexander, Hauke Schult, and Jan Christoph SteckelOn the Importance of Manufacturing Sectors for Sustainable Development and Growthpresented at the 22nd International Input-Output Conference, Lisbon, Portugal, July 14, submitted2015
Roeder, I.; Scheibleger, M.; Stark, R.How to make people make a change - using social labelling for raising awareness on sustainable manufacturingConference Proceedings GCSM 2015. (Paper accepted)2015
Schenker, S., G. Sproesser, A. Pittner, R. Borndörfer, M. Rethmeier, Y.J. Chang, and M. FinkbeinerSustainable welding process selection based on weight space partitionsProcedia CIRP. Contribution accepted (paper and proof of acceptance will be provided supplementary).2015
Schmid, JuliaVoluntary Industry Standards: An Experimental Investigation of a Greek GiftWZB Discussion Paper SP II 2015-2062015
Seliger, G., R. Jochem, F. Straube, H. KohlDie Lernfabrik ? Interdisziplinäre Zusammenarbeit von Praxis und Wissenschaft in der ProzessindustrieMQ ? Management und Qualität 04: 14-162015
Sproesser, G., A. Pittner, and M. RethmeierIncreasing performance and energy efficiency of Gas Metal Arc Welding by a high power tandem processProcedia CIRP. Contribution accepted (paper and proof of acceptance will be provided supplementary).2015
Sproesser, G., Y. Chang, et al.Life Cycle Assessment of welding technologies for thick metal plate weldsJournal of Cleaner Production. Contribution accepted (paper and proof of acceptance will be provided supplementary).2015
Sproesser, G., Y. Chang, et al.Prozess-Ökobilanzierung von Schweißtechnologien für DickblechanwendungenDVS Congress 2015, Nuremberg, Germany, DVS. Abstract accepted (updated Feb 2015)2015
Stark, R., Pförtner, A.Integrating ontology into PLM-tools to improve sustainable product developmentCIRP Annals ? Manufacturing Technology 64 (1). DOI: 10.1016/j.cirp.2015.04.0182015
Steckel, Jan Christoph, Ottmar Edenhofer, Michael JakobDrivers for the renaissance of coalProceedings of the National Academy of Sciences, doi: 10.1073/pnas.14227221122015
Tilhein, A., Nguyen, T. D., Wagner, E., Benecke, S., Lang, K.-D., Krüger, J.Classification of human interactions with tools using a tool-mounted wireless sensor node to support sustainable manufacturingPaper submitted to IARIA Sensorcomm 2015 in Venice2015
Uhlmann, E. Peukert, B.Verbesserung der Dämpfung von Leichtbaustrukturenwt Werkstatttechnik online, Volume 104, Issue 5, pp. 266-2712015
Uhlmann, E., J. Mewis and B. PeukertModulare Werkzeugmaschinengestelle -Grundlagenforschung und nachhaltige LösungsansätzeTagungsband 10. Berliner Runde - Neue Konzepte für Werkzeugmaschinen. Fraunhofer Institut für Produktionsanlagen und Konstruktionstechnik2015
Uhlmann, E., M. Saoji and B. PeukertPrinciples for interconnection of modular machine tool framesAbstract accepted and full paper submitted to GCSM 20152015
Uhlmann, E., M. Saoji and B. PeukertUtilization of thermal energy to compensate quasi-static deformations in modular machine tool framesAbstract accepted and full paper submitted to GCSM 20152015
Vierhaus, I., FügenschuhControlling System Dynamics ModelsProceedings of the 33rd International Conference of the System Dynamics Society2015
Wolf, Kirana, René Scheumann, Nikolay Minkov, Ya-Ju Chang, Sabrina Neugebauer, and Matthias FinkbeinerSelection Criteria for Suitable Indicators for Value Creation Starting with a Look at the Environmental DimensionProcedia CIRP 26: 24?292015
Y.-J. Chang, L. Schneider, M. FinkbeinerAssessing Child Development: A Critical Review and the Sustainable Child Development Index (SCDI)Sustainability, 7 (5), pp. 4973-4996, dx.doi.org/10.3390/su70549732015
Zimmer, A., Jakob, M., and Steckel, J. C.What motivates Vietnam to strive for a low-carbon economy??On the drivers of climate policy in a developing countryEnergy for Sustainable Development, 24, 19-322015
Wang, W.M.; Göpfert, T.; Stark, R.Data Management in Collaborative Interdisciplinary Research Projects?Conclusions from the Digitalization of Research in Sustainable ManufacturingISPRS Int. J. Geo-Inf. 2016, 5, 41. doi:10.3390/ijgi50400412016
Gausemeier, P., G. Seliger, S. Schenker, and R. BorndörferNachhaltige Technologiepfade für unterschiedliche Entwicklungsniveaus mithilfe mehrkriterieller Entscheidungsfindung10. Symposium für Vorausschau und Technologieplanung, pp. 65-94, Berlin, September 20-21.

2014
Uhlmann, E.; Fürstmann, P.The dependency between tool wear and the heat flux into the tool48th CIRP Conference on Manufacturing systems. NeaplesAbstract accepted but not published yet
Uhlmann, E.; Hollan, R.Resource Efficient Inline Cleaning ProcessesProceedings of the 10th Global Conference on Sustainable Manufacturing, 31 October , Istanbul, Turkey, p. 295 - 3002012
Uhlmann, E., R. Hollan, and F. FaltinEffiziente Strahlprozesse: Betrachtungen von Kosten, Energie- und RessourcenverbrauchFortschritt-Berichte VDI Reihe 2: 60?692012
Uhlmann, E.; Fürstmann, P.; Rosenau, B.; Gebhard, S.; Gerstenberger, R.; Müller, G.The Potential of Reducing the Energy Consumption for Machining TiAl6V4 by Using Innovative Metal Cutting ProcessesProceedings of the 11th Global Conference on Sustainable Manufacturing, Berlin, p. 593 - 598, Berlin: Universitätsverlag2013
Gausemeier, P., J. Seidel, T. Riedelsheimer, and G. SeligerSustainable Technology Pathways for Bicycle Mobility using Self-help WorkshopsProceedings of the 12th Global Conference on Sustainable Manufacturing2014
Uhlmann, E., P. Fürstmann, R. Hollan, B. Peukert, and K. KianinejadSustainable Manu-facturing: Advanced Machine Tool Components and Efficient Processes.Presented at the Sino-German Center on Sustainable Manufacturing Symposium, Karlsruhe, August 03?082014
Uhlmann, E., and R. HollanDry Ice Blasting: Investigation of particle impactPresented at the 2nd International Conference on Abrasive Processes, Cambridge, September 08.-102014
Schult, H., A. Radebach, I. Vierhaus, A. Fügenschuh, J. C. SteckelHow existing technologies can contribute to reducing global CO2 emissions21st EAERE Annual Conference, Helsinki, June 24-27, 2015, Conference Paper2015
Schult, Hauke, Mia Burger, Ya-Ju Chang, Paul Fürstmann, Sabrina Neugebauer, Alexander Radebach, Gunther Sproesser, Andreas Pittner, Michael Rethmeier, Eckart Uhlmann, Jan C SteckelAssessing CO2-reduction potentials of improved manufacturing processes using MRIOsJournal of Cleaner Production, accepted2015
Uhlmann, E.; Hollan, R.Blasting with Solid Carbon Dioxide? Investigation of the Mechanical Removal MechanismProceedings of the 12th Global Conference on Sustainable Manufacturing, Johor Bahru; aktualisiert: Procedia CIRP 26: 544?547, doi:10.1016/j.procir.2014.07.0642015
Schult, Hauke, Jan C Minx, Jan C Steckel, Leonie WenzRe-assessing truncation errors in lifecycle assessmentAccepted for presentation at the 23rd International Input-Output Conference, Mexico City, Mexio, June 20152015
Wenz, Leonie, Sven Norman Willner, Alexander Radebach, Robert Bierkandt, Jan Christoph Steckel, and Anders LevermannRegional and Sectoral Disaggregation of Multi-Regional Input-Output Tables - a Flexible AlgorithmEconomic Systems Research, 1?20in press